Steve’s Automotive is proud to offer BG products for resale out of our main office.

BG Transmission Flush Service

BG PF5 Steve's AutomotiveBG PF5 is the fast, powerful alternative to traditional transmission fluid exchange methods. Traditional transmission fluid exchange methods, such as a pan drop or most transmission flushes, do not remove all of the old fluid before new fluid is added. The old fluid quickly contaminates the newly added fluid, causing it to break down much more quickly than completely clean automatic transmission fluid. Contaminated transmission fluid leaves behind deposits that can cause gear grinding, delayed transmission response, or stalling.

As a vital part of the BG Transmission Service, the BG PF5 cleans the system using BG Quick Clean for Automatic Transmissions, removes old automatic transmission fluid while simultaneously adding new fluid such as BG Universal Synthetic ATF or BG Universal Synthetic CVT Fluid. The simultaneous exchange method permits no intermixing of new and old fluids, meaning the new fluid will last significantly longer. Once the fluid exchange is complete, additives such as BG ATC Plus or BG Universal Synthetic CVT Fluid Conditioner, can be installed through the machine to protect the transmission and ensure long fluid life.

bgairBG Power Steering Service Center

The BG Power Steering Service Center quickly and efficiently removes spent power steering fluid while simultaneously installing new power steering fluid.

Power steering fluid operates under extreme pressures and temperatures, eventually causing it to break down and become contaminated. Fluid contamination is primarily caused by oxidation which in turn leads to deposit formation. Traditional drain-and-fill fluid replacement methods don’t remove all contaminated fluid. When new fluid is added it is immediately tainted by the leftover fluid.

The BG Power Steering Service Center drains contaminated power steering fluid while simultaneously installing fresh power steering fluid. This method ensures that all the contaminated fluid is replaced and removes abrasive wear metals and debris that grind away valves and seals.

BG 44K®

BG 44k Steve's AutomotiveBG 44K® is formulated to safely and rapidly clean the entire fuel system, including fuel injectors, intake valves, ports, fuel filters and combustion chambers. Because it provides efficient removal of upper engine deposits, BG 44K® reduces problems caused by deposit buildup such as engine surge, stalling, stumble, hesitation and power loss. BG 44K® technology has been proven to increase combustion quality and power output. BG 44K® will provide quick cleanup of coked fuel injectors and corrosive deposits on the Fuel Sending Unit. It is compatible with all fuel system materials, alcohol-blended fuels and common fuel additives.

BG 44K® is the ultimate tank-treatment fuel system cleaner. Its 11 ounces of high quality detergents and additives that you pour right into the gas tank to restore performance and gas mileage. It vanquishes deposits in combustion chambers, intake manifolds, ports and on valves and restores flow in fuel injectors. Basically, it cleans the entire fuel system!

Gasoline quality is inconsistent. And when gas at the pump is poor quality, it can cause deposit buildup, inefficient ignition and combustion and poor power output. To make matters worse, small, high output engines are extremely sensitive to deposits that build up on fuel injectors, intake ports, on intake valves and in combustion chambers. Even small amounts of deposits cause increased exhaust emissions, reduced fuel economy, drivability problems and engine knock.

BG Air Intake Service

BG Power Cleaner Steve's AutomotiveBG Air Intake Service quickly removes pesky deposits that can accumulate in the air throttle body assemblies and plenums.

Heavy deposits are common in the air intake because to help control emissions, noxious exhaust gases and crankcase vapors are captured and fed back into the air intake system. Gummy substances contained in these vapors combine with dirt and form deposits. These deposits will substantially reduce airflow, disrupting the critical air/fuel ratio that is essential to engine operation and fuel efficiency. Drivability problems such as rough idle, poor performance, and increased exhaust emissions result from heavy deposit buildup.

BG Air Intake System Cleaner reduces harmful exhaust emissions and restores engine performance. As an integral part of the BG Fuel/Air Induction Service, professional-use BG Air Intake System Cleaner is used with the BG AIS Cleaning Tool Kit, PN 9206, and provides a complete “on engine” cleaning of the air throttle body assembly and plenum area of the engine.

CoolingBG Universal Cooling System Cleaner

BG Universal Cooling System Cleaner removes tough cooling system scale and deposits.Over time, rust, scale, and other effects of corrosion build up in the cooling system. When deposits form on heat transfer surfaces, engine loses the ability to effectively cool off. Buildup also restricts coolant flow, causing overheating and possible engine damage.

Removes built-up scale, oil, and harsh mineral deposits • Removes tough residues caused by oil fouling and coolant inhibitor breakdown • Removes corrosion byproducts that speed inhibitor depletion

BG Products Frigi-FreshBG Frigi-Clean®

BG Frigi-Clean® removes accumulated bacteria, mold, spores, road grime, nicotine oil, and debris and restores heating/cooling efficiency.Grease, road grime, dirt, nicotine residue and other debris can build up in the ventilation system and collect moisture. As a result, mold spores, bacteria and fungi are forced into the passenger compartment every time the heater or A/C is turned on. These contaminants can cause health issues such as allergies, asthma, respiratory infection and illness.

  • Restores efficiency
  • Improves air flow volume and quality
  • Makes cold air colder
  • Freshens interior air

BG